DIY is something I always liked to do even though I had little experience at the beginning and doing small crafts only, but I started to evolve with practice and time and so I started to practice DIY at home, on some furniture, until I got to DIY floors and walls of the House. My next goal was to change the floor of my house that used to be just concrete and I wanted to put a vinyl floor. I had no idea how to start but I researched and found it on the website: https://www.buildexpo.org/diy-vinyl-flooring-a-step-by-step-guide-on-how-to-install-vinyl-flooring-in-singapore/ Although the website above is telling you how to install vinyl flooring in Singapore, it was the best web address I found as it explains in detail step by step how to install the flooring and what tools are needed for this.As I imagined, installing vinyl on the floor was not that difficult different from installing other floors as most of the tools needed to install vinyl are found in most people’s homes or at least in construction stores close to the vast majority of the interested public. in DIY and almost always at an affordable price. The tools and materials needed for installation are: Pocket Knifefloor rollerStickercarpenter’s squareMeasuring tape The thickness of the floor is the customer’s choice but the thicker the floor, the more resistant it will be, the thick floor is ideal for high traffic environments such as kitchens and offices.The installation process is based on the following steps:*Measuring the room – This is the first step in the installation and must be done carefully. Adding extra cents is a good strategy as the extra material will compensate for cutting, centering, and trimming.*Smooth the subfloor – Vinyl flooring can be installed in almost any type of environment as long as it is smoothed properly. Rough surfaces over time will enhance sharp spots and thus damage the vinyl as well as giving it an unpleasant appearance.*Cut the vinyl floor.*Tape application.*Cut the vinyl.* Attach the floor to the adhesive.